Key Points of Chemical Lab Table Bench Maintenance

The chemical lab table is a platform that must be used in the chemical laboratory. The maintenance of the chemical lab table is very important, so we suggest that everyone must properly maintain the chemical lab table.

Maintenance of chemical lab bench:

1. Do not rotate for a long time in a natural environment where the temperature exceeds 135°C.

2. Do not use sharp blocks to scratch the cabinet countertop.

3. Do not expose the chemical lab bench to fire, molten metal, metal sparks or sunlight for a long time, nor can it be used as a cutting surface.

4. It is recommended to use warm water, toluene or a mild cleaning solution for the cabinet countertops. You can use cleaning solutions for hand washing or washing dishes. Do not use cleaning solutions with wear-resistant materials and strong alkali ingredients to prevent damage to the surface. For the dirt that is difficult to remove, sodium hypochlorite can be dropped on the surface of the contaminated corrosion-resistant physical and chemical board and washed with water.

5. The flame of the gas lamp or alcohol lamp will damage the countertop of the chemical lab tables, so the alcohol lamp or gas lamp must be placed on a tripod for use.

Installation of the chemical lab table:

Step 1: Check the height of the adjustment feet at the bottom of the cabinet door, and turn all the adjustment feet to a distance of 5mm from the ground to facilitate abnormal adjustments on the ground.

Step 2: Place various types of cabinet doors in time according to the engineering drawings, and observe whether the top table is high or low. If it is not level, adjust the feet of the cabinet, and use a spirit level to measure accurately, so that the horizontal and vertical levels are level, and the edges of the cabinet doors are aligned and connected with each other with screws or capped anchor bolts. When connecting with each other, pay attention to the leveling of the surface and whether there are any bumps. Each adjustment foot must touch the ground to bear the force.

Step 3: After fixing the side connecting plate, you can enter the installation of the laboratory lab bench cabinet countertop. It is reminded that if there must be stainless steel sinks and reagent cabinet pole holes on the countertop, it needs to be done before sticking the cabinet countertop..